Safety thermostat - manual reset - vertical lug
Product features Safety thermostat - manual reset - vertical lug
Bimetallic safety thermostat - manual reset - vertical terminal
The temperature limiter is a temperature sensitive device, which is intended to maintain a temperature below a particular value under normal operating conditions, by automatically cutting the electrical circuit. This device does not reset automatically and works with the manual reset option. Resetting is achieved by manually pressing the reset button after the device has cooled below the open temperature value.
The choice of its operational position is free. This thermostat normally has closed contacts.
6,3 mm vertical faston lug
APPLICATION: This temperature limiter prevents overheating in a wide range of consumer, industrial and commercial products.
|Rated voltage, V||~ 250|
|Rated current, A||10|
|Number of cycles at rated current 10 А and power coefficient. 0,95||10000|
|Operating temperature, ° C||+ 10 200 ° C ... + ° C|
|Operating temperature tolerance, ° C||±3|
|Transient resistance, Ω||0.05|
|Contact bounce-make, ms||3|
|Electrical resistance of insulation, V||1500|
|Insulation resistance, МΩ||50|
|Heating speed, K / min||minimum-0.1; Maximum 1.0|
|Degree of protection provided by the enclosure||IP4X|
|Trigger temperature||Aperture tolerance|
|0 to 60||4|
|61 to 160||4|
|161 to 210||5|