Call us : +33 2 33 61 16 70

Pt100 PC programmable temperature transmitter with push button calibration

Reference: GSEM1605PR

Pt100 PC programmable temperature transmitter with push button calibration
  • RTD temperature transmitter

  • PT100, Cu100, Cu53, Ni100, Ni120

  • (4 to 20) Two-wire mA output

  • Calibrate and adjust output without PC

  • View live data on an Android phone or tablet

International shipping

Standard or express delivery

Secure Payments

All payments are secure and approved.

Best price guarantee

Contact us to define your payment method.

+33-233-611-670

English - French - German - Spanish

Product details about "Programmable PC Pt100 temperature transmitter with push button calibration"

The SEM1605P is a rail mounted temperature transmitter from Status Instruments. It has been designed to accept the most common RTD temperature sensor inputs and provide the user with a standard two-wire (4 to 20) mA output signal. All temperature ranges are linear to temperature.

Designed for ease of use, our latest USB interface is equipped for quick and easy setup. Simply connect a standard USB cable between the SEM1605P and your PC. Our free configuration software will guide you through the changes you want to make. To save time, the SEM1605P does not need to be wired to a power supply during the setup process, it is powered through the USB interface from your PC.

 

ACTIVE RANGE

The SEM1605P is a rail mounted temperature transmitter with a user push button selection option, allowing adjustments to 4mA and 20mA for a live value. The "user setting" function can be locked during configuration if it is not required. The status LED indicates an input out of range during normal operation, during “user adjustment” it is also used to indicate the adjustment phase.

 

(4 and 20) mA TRIM

The knobs can also be used for adjusting the 4 mA and 20 mA current trim to add small offsets to the (4 or 20) mA output.

 

SENSOR REFERENCE

Referencing the SEM1605P sensor via the Windows based USBSpeedlink software allows a close match with a known reference sensor, thus eliminating possible sensor errors.

 

SENSOR BURN DETECTION

If a sensor cable is broken or disconnected, the SEM1605P output will automatically go to its user-defined level (high or low) or to a preset value.

 

STABILITY

The SEM1605P DIN rail transmitter incorporates the latest digital technology to ensure precise, low drift performance.

General

  • Reference GSEM1605PR
  • Name Pt100 PC programmable temperature transmitter with push button calibration

Features

  • Type Din Rail
  • Type of entries PT100
    PT1000
  • Type of outputs 4.20mA

8 other products in the same category: