Se rendre au contenu

 MCP3208 
 Temperature sensors 

12-bit multi-channel ADC with SPI interface, designed for precise analog signal acquisition in embedded systems.

 Maximum precision
+/- 1,0 LSB

 Minimum temperature
-40°C

 Maximum temperature
+125°C

 Minimum dimensions
10 x 10 x 2

Response time

Fast

 Drift

Low

 Self-warming
Low

Price
Low

What is a MCP3208 sensor ?Operating principleTechnical SpecificationsWiring ConfigurationSelf-warmingApplication areas

What is a MCP3208 sensor ?

The MCP3208 is a 12-bit SPI analog-to-digital converter manufactured by Microchip.

It allows for the transformation of analog signals (voltage) into digital values that can be processed by a microcontroller.

With its 8 independent channels, it can measure:

  • multiple analog temperature sensors (NTC, amplified Pt100, thermocouple with amplifier),
  • or voltage signals (0–5 V or 0–3.3 V depending on the power supply).

It is a universal component in Guilcor's data acquisition systems.

Operating principle

The MCP3208 receives an analog signal between 0 and Vref and converts it to 12 bits via a successive approximation ADC.

The result is transmitted serially via the 4-wire SPI interface.

V_IN = (N / 4096) × V_REF

with

  • N = numerical value (0–4095),
  • Vref = reference voltage of the converter.

Technical specifications

Parameter
 Typical value

Number of channels

 8 simple entries or 4 differential
Resolution 12 bits (1 LSB ≈ 1.22 mV at 5 Vref)
Reference voltage (Vref) 2.5 to 5.0 V

Sampling rate

100,000 samples/s

Interface

SPI (read/write)

Operating current

500 µA typical

Sleep mode

< 1 µA

Differential entry

Yes

Case

DIP-16 / SOIC-16 / TSSOP-16

Gain drift

< ±0,1 % / 25 °C

Wiring Configuration

Brooch
 Name

Function

1-8

 CH0-CH7

Analog inputs (0–Vref)
9 DGND

Mass density
10 CS/SHDN

Chip Select (SPI)

11

DIN

SPI Input (MOSI)

12

DOUT

SPI Output (MISO)

13

CLK

SPI Clock

14

AGND

Analog mass

15

VREF

Reference voltage

16

VDD

Power supply 2.7–5.5 V

Self-warming

Almost none. The MCP3208 consumes less than 500 µA, making it perfect for low-power or battery-operated systems.

Application areas

⚙️ Analog conversion for RTD, NTC sensors, amplified thermocouples

🧠 Multichannel measurement chains (up to 8 probes)

💡 Acquisition of environmental or industrial data

🧱 Embedded systems with microcontrollers (ESP32, STM32, Arduino)

🔋 Low power projects and wireless monitoring







Should I choose a MCP3208 sensor ?

Strengths points

  • 🎯 8-channel versatility
         → Allows for the simultaneous measurement of up to 8 analog signals, ideal for multi-sensor systems (RTD, NTC, voltage, pressure...).
  • ⚡ Excellent responsiveness
         →Ultra-fast conversion time (≤10 µs) — perfect for real-time thermal monitoring or fast control loops.
  • 💡 Low consumption and reduced cost
         → A reliable 12-bit precision at a low price: an excellent compromise between performance, simplicity, and energy efficiency.
MCP3208 Sensors

Weaknesses points

  • 📶 Requires analog conditioning
         → The MCP3208 does not directly read resistive sensors or raw thermocouples — it must be paired with an amplifier or measurement bridge.
  • 🔋 Sensitive to noise on Vref
         → The quality of the reference voltage directly affects the overall accuracy (ensure stable filtering).
  • 🧠 No built-in thermal compensation
    → Unlike a module like the MAX31856, it does not include temperature management, it is up to the user to apply the software correction.

Useful information

Here is some useful information regarding the MCP3208 sensors.

The MCP3208 is a 12-bit analog-to-digital converter using a successive approximation (SAR) architecture.

It allows for fast and stable reading of analog signals between 0 and Vref.

Parameter Typical value
Resolution 12 bits (4096 levels)
Absolute precision
 ±1 LSB typical
Reference voltage (Vref)
 2,5 → 5,0 V
Entry beach
 0 → Vref
Sampling rate
 Up to 100 ksps
Gain error
 ±0,1 %
Offset error
 < ±1 LSB
Thermal drift
 < 1 ppm/°C

🔹 Remarks:

  • Each bit represents Vref / 4096 volts.
  • For example, for Vref = 5 V → 1 LSB = 1.22 mV.
  • No noticeable self-heating (< 0.05 °C).

Let's take the example of a Pt100 RTD probe connected to an instrumentation amplifier (INA333) whose output varies from 0 to 5 V.

V_in = N / 4096 × V_ref

N = V_in / V_ref × 4096


Example :

• V_ref = 5.0 V

• V_in = 2.48 V


N = 2.48 / 5.0 × 4096 = 2032


✅ Numeric value = 2032 / 4096 = 49.6% of full scale

The microcontroller then converts this data into temperature according to the sensor's curve.

The MCP3208 connects to any microcontroller via the 4-wire SPI bus.

It can power up to 8 analog sensors with fast multiplexed conversion.

🔹 Typical components

Component
 Function
MCP3208 Analog-to-Digital Converter SPI
Microcontroller (Arduino, ESP32, STM32)
 Lecture SPI and processing
Analog sensor (RTD, NTC, etc.)
 Source of the signal
Instrumentation amplifier
 Voltage adaptation and linearization
Voltage reference (LM4040, ADR03)
 Measurement stability
Capacitors 100 nF / 10 µF
 Noise filtering on Vref and VDD
🔹 Functional diagram (ASCII)
        +5V
         │
        [Analog sensor
         │
     ┌────────────┐
     │ Amplifier │
     └──────┬───────┘
            │
            ▼
      ┌──────────────┐
      │   MCP3208    │
      │──────────────│
      │ CH0–CH7 ← sensors │
      │ CLK  → SPI SCK     │
      │ DOUT → MISO        │
      │ DIN  → MOSI        │
      │ CS   → Chip Select │
      │ VREF ← 5V ref      │
      │ GND  → mass       │
      └──────────────┘
             │
      ┌────────────┐
      │ Microcontroller │
      └────────────┘

🔹 Operating Principle

1️⃣ The microcontroller selects the channel to read via SPI.

2️⃣ The MCP3208 converts the analog voltage (0 → Vref) into a 12-bit data.

3️⃣ The digital value is sent on the MISO line.

4️⃣ The MCU calculates the physical value (°C, V, Ω, etc.) according to the associated sensor.

Advantage Description
🧩 8 independent entries Ideal for multichannel systems
⚙️ Universal SPI Compatibility Works with most microcontrollers
🎯 Good accuracy for a low cost 12 bits → 0.025% of full scale
💡 Very low consumption <1 mW typical
🧠 Easy integration with RTD, NTC, or amplified thermocouples Direct conversion after linearization
🔧 No calibration necessary Ready to use as soon as powered on

 We integrate any sensor into any probe 

Smooth tube probe

 Smooth tube 

Waterproof probe

 Waterproof

Bayonet probe

 Bayonet

Slot probe

 Slot

Ambient probe

 Atmosphere

Head connection probe

Termal block

Stick-in probe

Stick-in

Thread probe

Thread

Contact probe

Contact

Jacketed probe

Jacketed

PCBA Design

PCBA design

Winding probe

Winding

Plus de 1 000 000 sondes livrées en 2025

Contactez-nous pour une offre personnalisée

Contactez-nous

Need a MCP3208 sensor?

Que vous ayez besoin de quelques pièces pour un prototype ou de plusieurs centaines pour une ligne de production, nous vous accompagnons à chaque étape.

Soumettre