Universal data logger with 4 thermocouple inputs.
The Multilogger can be permanently installed on an Ethernet network ou operate as a portable device.
Un traceable calibration certificate conforming to EN ISO / IEC17025 is included.
The Multilogger is a battery-powered data logger able to measure and record the values of sensors and electricity through its inputs.
The data logger can be connected to Ethernet.
Measured values can then be viewed on a web browser, stored and downloaded for later analysis.
INCLUDED IN DELIVERY
- Traceable calibration certificate
- 3 AA rechargeable batteries
- Power source
- USB cable
- Wall bracket
- FREE Analysis Software
Temperature range : -10 to +60 ° C
Humidity operating range: 5% to 85% RH, non-condensing
Temperature compensation of humidity sensor: the whole temperature range
Measuring interval: 1s to 24h
Available temperature units: degrees Celsius, degrees Fahrenheit
Calculated values: dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
Memory capacity (approx.): 1 values (non-cyclic recording), 000 values (cyclic recording)
Communication interface: Ethernet, USB, RS232
Ethernet communication protocols: WWW, SNMPv1, XML, DATALINK
Alarm protocols: E-Mail
Configuration: WWW configuration
Power : AC adapter 230Vac / 5Vdc (neccessary for Ethernet interface)
Rechargeable NiMH batteries 3x 1.2V AA (emergency or portable application)
or 3x 1.5V AA alkaline batteries (for portable applications)
Power cable : coaxial, diameter 5,5 x 2,1 mm
Dimensions: 178 x 95 x 37 mm (W x H x D), without cables attached