The thermometer, hygrometer and barometer are designed for measurement and recording of temperature, relative humidity and atmospheric pressure in the internal non-volatile memory.
Barometric pressure trend reading also available.
The free PC program allows you to transfer the saved data to the computer for evaluation.
The data logger is connected to the PC via a USB cable included only for data transfer from memory.
While connecting with the PC, no measurement and recording is activated.
Thermometer, hygrometer, barometer with temperature-humidity probe of the outside air on a 1 meter cable.
Cable lengths of 2 and 4 meters are optionally available.
The diameter of the probe is 18 mm and its length is 135 mm.
Indoor temperature and air pressure sensors integrated.
INCLUDED IN DELIVERY
- Traceable calibration certificate
- 9V battery
- Mini USB cable
- Plastic transport case
- Self-adhesive dual lock for easy installation
- FREE Analysis Software
- Relative humidity
- Atmospheric pressure
Operating temperature range: -10 to +60 ° C
Temperature sensor : RTD Ni1000 / 6180ppm
Accuracy of temperature measurement with integrated sensor: ± 0.4 ° C
Accuracy of air humidity measurement: ± 2,5% RH from 5 to 95% at 23 ° C, resolution 0,1%
Dew point measurement accuracy: 1,5 ° C at room temperature <25 ° C and RH> 30%, range -60 to +80 ° C
Accuracy of air pressure measurement: ± 2hPa at 23 ° C, resolution 0.1hPa
Reading the barometric pressure trend: in hPa - for the last three hours
Supply : 9V batteries
Battery life: 2 months on average
Real time clock: year, leap year, month, day, hour, minute, second
PC interface: USB
Sampling interval in data logging mode: 18 adjustable values from 10 to 24 hours
Total memory capacity: up to 16 recorded values
Data logging modes: non-cyclic - data logging stops after filling the memory
cyclic - after filling the memory, the oldest data is overwritten by the new ones
Dimensions: 141 x 71 x 27 mm
IP protection: IP20
Weight (with battery): approximately 150 g
Warranty: 3 years