GSM temperature data logger for four external probes with integrated modem

TECHNICAL DATA

The data logger is designed to record the temperature of four external Pt1000 probes.

If the defined limits are exceeded, SMS and JSON messages can be sent over a GPRS data connection.

He's possible to define the regular sending of messages JSON to the database, the send interval is adjustable.

The recording is carried out in a non-volatile electronic memory.

The data can be transferred to a PC via USB-C.

The device includes a traceable calibration certificate with declared metrological traceability of standards based on the requirements of EN ISO / IEC 17025.
 

INCLUDED IN DELIVERY

• U0141M
• Manual
• Traceable calibration certificate
• Rechargeable battery
• Power source
• USB-C cable
• FREE Analysis Software
• Cloud for 3 months

External probes are not included.
SIM card is not included.

MEASURED VALUES

- Temperature

Temperature measurement range: -200 to +260 ° C

Construction type: For Pt1000 external temperature probes

Accuracy of temperature measurement: ± 0,2 ° C; ± 0,2% of the measured value in a range of +100 to +260 ° C

Reading resolution: 0.1 ° C

Temperature measurement response time t90 (no temperature 20 ° C, air flow rate of about 1 m / s): Depending on the connected probe

Real time clock: Year, leap year, month, day, hour, minute, second

Data logging interval: Adjustable from 1s to 24h

Alarm display and refresh: 1s, 10s, 1min adjustable

Total memory capacity: 500 values ​​in non-cyclic recording mode, 000 values ​​in cyclic recording mode

Data logging mode: Non-cyclic - data logging stops after full memory, cyclical - after full memory, the oldest data is overwritten by the new ones

Supply : SONY LiIon 5200mAh Battery

IP protection: IP67 - protected against the influence of temporary immersion in water

Dimensions: 61x93x53, with antenna 120x93x53

Weight (with battery): 270 g

Warranty: 3 years