Multilogger - Thermometer with 4 thermocouple inputs and Ethernet port

TECHNICAL DATA

Universal data logger with 4 thermocouple inputs.

The Multilogger can be permanently installed on an Ethernet network ou operate as a portable device.

Un traceable calibration certificate conforming to EN ISO / IEC17025 is included.

The Multilogger is a battery-powered data logger able to measure and record the values ​​of sensors and electricity through its inputs.

The data logger can be connected to Ethernet.

Measured values can then be viewed on a web browser, stored and downloaded for later analysis. 

INCLUDED IN DELIVERY

• M1200
• Manual
• Traceable calibration certificate
• 3 AA rechargeable batteries
• Power source
• USB cable
• Wall bracket
• FREE Analysis Software
  
  
  

MEASURED VALUES

- Temperature

Temperature range : -10 to +60 ° C

Humidity operating range: 5% to 85% RH, non-condensing

Temperature compensation of humidity sensor: the whole temperature range

Measuring interval: 1s to 24h

Available temperature units: degrees Celsius, degrees Fahrenheit

Calculated values: dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy

Memory capacity (approx.): 1 values ​​(non-cyclic recording), 000 values ​​(cyclic recording)

Protection: IP20

Communication interface: Ethernet, USB, RS232

Ethernet communication protocols: WWW, SNMPv1, XML, DATALINK

Alarm protocols: E-Mail

Configuration: WWW configuration

Power : AC adapter 230Vac / 5Vdc (neccessary for Ethernet interface)
Rechargeable NiMH batteries 3x 1.2V AA (emergency or portable application)
or 3x 1.5V AA alkaline batteries (for portable applications)

Power cable : coaxial, diameter 5,5 x 2,1 mm

Dimensions: 178 x 95 x 37 mm (W x H x D), without cables attached