Temperature and humidity controller with RS232 output
Standard or express delivery
All payments are secure and approved.
Best price guarantee
Contact us to define your payment method.
English - French - German - Spanish
Product details about "Temperature and humidity controller with RS232 output"
Transmitter temperature and humidity with two relay outputs.
Use Case exterior and interior.
Relative humidity, temperature probe on cable.
The measured values are also converted to other interpretations of humidity: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy. Three inputs with two states.
INCLUDED IN DELIVERY
- Traceable calibration certificate
- Free Tsensor configuration software
- Relative humidity
- Calculated values (dew point, etc.)
- Two state signal
Maximum switching voltage, current, power of the relay output: 50V, 2A, 60VA
Audible alarm: from integrated beeper - switchable
Relative humidity range: 0 to 100%
Accuracy of the relative humidity measurement: ± 2,5% relative humidity from 5 to 95% at 23 ° C
Accuracy of temperature output: ± 0,4 ° C from -30 to + 100 ° C
± 0,4% from reading at + 100 ° C
Available temperature units: degrees Celsius, Fahrenheit
Dew point output accuracy and range - for details see graphs: ± 1,5 ° C at ambient temperature T <25 ° C and relative humidity> 30%
range -60 to +80 ° C
Accuracy and absolute humidity output range: ± 1,5 g / m3 at ambient temperature T <25 ° C
range from 0 to 400 g / m3
Accuracy and specific humidity output range: ± 2 g / kg at room temperature T <35 ° C
range 0 to 550 g / kg
Accuracy and output range of mixing ratio: ± 2g / kg at ambient temperature T <35 ° C
range from 0 to 995 g / kg
Precision and range of specific enthalpies: ± 3 kJ / kg at ambient temperature T <25 ° C
range: 0 to 995 kJ / kg
Signal for binary inputs: voltage-free contact, open collector or two-state voltage signal.
The inputs are not galvanically isolated.
Minimum pulse length at binary input: 500 ms
Open contact voltage: 3.3 V
Low voltage level: 0 to +0.5 V
High voltage level: +3.0 to + 30V
Temperature operating range: -30 to +80 ° C
LCD display operating temperature range: readable at an operating temperature of + 70 ° C, it is recommended to turn off the LCD screen above 70 ° C
Temperature compensation of humidity sensor: the entire temperature range
Filtering capacity of the sensor cover: 0.025mm - filter with stainless steel mesh
Communication protocol : ModBus RTU and Advantech ADAM compatible protocol
Communication speed: 110 to 115200 Bd
IP protection: Electronics IP65, sensors IP40
Supply : 9-30Vdc, power consumption about 1W
Probe cable length: 1m, 2m or 4m optional
Dimensions: 136 x 159 x 45mm (W x H x D), probe length 88mm, probe diameter 18mm
Weight: about 500g - 1m probe
Warranty: 3 years