Temperature transmitter with RS485 output and relay
Product features Temperature transmitter with RS485 output and relay
Temperature transmitter for Pt1000 sensors with two relay outputs.
Use Case exterior and interior.
For Pt1000 external temperature sensor.
Three entrances two-state.
INCLUDED IN DELIVERY
- Traceable calibration certificate
- Free Tsensor configuration software
- Two state signal
Maximum switching voltage, current, power of the relay output: 50V, 2A, 60VA
Audible alarm: from integrated beeper - switchable
Temperature input accuracy without probe: ± 0,2 ° C
Available temperature units: degrees Celsius, Fahrenheit
Signal for binary inputs: dry contact, open collector or two-state voltage signal.
The inputs are not galvanically isolated.
Minimum pulse length at binary input: 500 ms
Open contact voltage: 3.3 V
Low voltage level: 0 to +0.5 V
High voltage level: +3.0 to + 30V
Temperature operating range: -30 to +80 ° C
LCD display operating temperature range: readable at an operating temperature of + 70 ° C, it is recommended to turn off the LCD screen above 70 ° C
Protocol communication: ModBus RTU and Advantech ADAM compatible protocol
Communication speed: 110 to 115200 Bd
IP protection: IP65
Supply : 9-30Vdc, power consumption about 1W
Dimensions: 136 x 160 x 45 mm (W x H x D)
Weight: about 350g
Warranty: 3 years