The data logger is designed to record the temperature of four external Pt1000 probes.
If the defined limits are exceeded, SMS and JSON messages can be sent over a GPRS data connection.
He moves possible to define the regular sending of messages JSON to the database, the send interval is adjustable.
The recording is carried out in a non-volatile electronic memory.
The data can be transferred to a PC via USB-C.
The device includes a traceable calibration certificate with declared metrological traceability of standards based on the requirements of EN ISO / IEC 17025.
INCLUDED IN DELIVERY
- Traceable calibration certificate
- Rechargeable battery
- Power source
- USB-C cable
- FREE Analysis Software
- Cloud for 3 months
External probes are not included.
SIM card is not included.
Temperature measurement range: -200 to +260 ° C
Construction type: For Pt1000 external temperature probes
Accuracy of temperature measurement: ± 0,2 ° C; ± 0,2% of the measured value in a range of +100 to +260 ° C
Reading resolution: 0.1 ° C
Temperature measurement response time t90 (no temperature 20 ° C, air flow rate of about 1 m / s): Depending on the connected probe
Real time clock: Year, leap year, month, day, hour, minute, second
Data logging interval: Adjustable from 1s to 24h
Alarm display and refresh: 1s, 10s, 1min adjustable
Total memory capacity: 500 values in non-cyclic recording mode, 000 values in cyclic recording mode
Data logging mode: Non-cyclic - data logging stops after full memory, cyclical - after full memory, the oldest data is overwritten by the new ones
Supply : SONY LiIon 5200mAh Battery
IP protection: IP67 - protected against the influence of temporary immersion in water
Dimensions: 61x93x53, with antenna 120x93x53
Weight (with battery): 270 g
Warranty: 3 years