Wireless IoT temperature, atmospheric pressure and CO2 sensor, Sigfox

TECHNICAL DATA

Power meter by Sigfox with sensor internal temperature and atmospheric pressure and input for concentration probe External CO2 (1% or 5%).

The device measures temperature, atmospheric pressure internal sensors and CO2 removable and replaceable external probe on the cable - you can choose from an optional accessory.

Measured values ​​are sent within an adjustable time interval (10 min to 24 h) by radio transmission in the Sigfox network to the Cloud, from which the user can view them using a personal computer or a mobile device.

The instrument can monitor up to 2 alarm limits of the quantity measured.

Exceeding these limits is indicated by sending an emergency message.

Cloud send this alarm message by e-mail to the selected user.

The device is suitable for applications which tolerate the delay of the information provided by Sigfox (max. 10 min).

Highlights

• Wireless transmission of measured values ​​and alarm states
• Two battery slots for longer run time
• Battery power supply (size C 3,6 V) with low battery indication (battery life up to 7 years)
• Remote configuration of the device from the Cloud (maximum once per day)
• IP65 for the use of the device in outdoor applications
• Calibration certificate traceable to EN ISO / IEC 17025
  
  

The availability of the Sigfox network in a particular location.

Check the availability of your Sigfox network before you buy your device. Sigfox network devices can be used anywhere in the RC1 zone.

INCLUDED IN DELIVERY

• AR006559
• Manual
• Traceable calibration certificate
• 1x 3,6 V lithium battery
• Sigfox connection for 1 year
• Cloud for 1 year (version to test)
• FREE Analysis Software
  
  
  

MEASURED VALUES

- Temperature
- CO2
- Atmospheric pressure

TEMPERATURE SENSOR

Measuring range : -20 to +60 ° C

Accuracy: ± 0.4 ° C

Resolution: 0.1 ° C

Temperature measurement response time t90 (temperature level 20 ° C, air flow approx. 1 m / s): t90 <8 min (temperature change 20 ° C)

CO2 SENSOR

Measuring range : 0 to 10000 ppm

Accuracy: 100 ppm + 5% of the measured value at 23 ° C at 1013 hPa

Measuring range : 0 to 50000 ppm

Accuracy: ± (1,5% of full scale + 2% of measured value)

Resolution: 1 ppm

Cable length of external CO2 probe: 1, 2 or 4 meters

ATMOSPHERIC PRESSURE SENSOR

Measuring range : 600 to 1100 hPa

Accuracy: ± 1,3 hPa at 23 ° C from 800 to 1100 hPa

Resolution: 0,1 hPa

GENERAL TECHNICAL DATA

Operating temperature : -20 to +60 ° C

Canals : internal sensor for temperature, humidity and atmospheric pressure + 1x external CO 2 sensor

Message transmission interval: adjustable 10 minutes, 20 minutes, 30 minutes, 1 hour, 3 hours, 6 hours, 12 hours, 24 hours

Operating frequency: 868 MHz

Maximum transmission power: 25mW

Sigfox radiation class: 0U

Radio configuration area: RC1 (possible operation in Europe, Iran, Oman and South Africa)

Typical transmitter range: 50 km on the ground, 3 km in town

Supply : Lithium battery, 3.6 V, size C, capacity 8,5 Ah

Protection class: electronic IP54, sensor IP65 CO2

Number of battery slots: 2

Dimensions: 179 x 134 x 45 mm

Weight (with batteries): 340g

Warranty: 3 years 

BATTERY LIFE