Fast response time probe - CAN protocol

Delivery in 3 to 5 weeks
  • Fast response temperature sensor.
  • Measurement by contact with liquid or gaseous substances.
  • Direct temperature measurement in tubes or tanks.
  • FEasy to assemble thanks to the "S-head" design.

Product features Fast response time probe - CAN protocol

DESCRIPTION AND APPLICATION

Technical drawing of SD 162 probe modbus rs485

The sensor includes plastic head and metal tube in which a temperature sensor is placed. The metal tube includesd a screw connection with a standard G 1/2 "thread. In the head there is a terminal block or a converter, to which the supply cable for the sensor and the digital output signal

SD164, SD164K  protocol CANopen / CiA DS 301 communication, bus communication CAN

The sensors are designed to operate in a chemically non-aggressive environment, the method of use should be selected according to the temperature and chemical resistance of the sensor head.

ACCESSORIES

  • Plug connector CONEC 43-00092
  • connection cables with connector RKT , respectively. rectangular RKWT

Sensor type

(K-with connector)

SD 164

SD 164K

Output signal CAN / CANopen-CIA DS 301
Measuring range *) -50 to 130 ° C
Precision electronics ± 0,2 ° C
Sensor type / accuracy Pt1000 / ±(0,3°C + 0,0005 | t |)
Supply voltage 15 to 30 V DC
Nominal supply voltage Un 24 V DC
Consumption / supply current maximum: 500 mW, typical: 300 mW
Working conditions

ambient temperature: -30 to 100°C

relative humidity: maximum of 100%

atmospheric pressure: 70 to 107 kPa

Degree of protection IP 65 according to EN 60529, as modified
Response time τ 0,5 <4 s (in white water 0,2 ms -1 )
Standard rod length 50, 100, 160, 220 mm
Tube diameter 4 ± 0,1 mm
tube material DIN 1.4301 stainless steel
Standard thread type G1 / 2 "
Insulation resistance >200MΩ at 500V DC, 25°±3°C; humidity <85%
Head dimensions 70 x 63 x 34 mm
Head material POLYAMIDE

Head connector type

(for sensors with connector)

RSFM4-M12-Lumberg

Recommended conductor cross-section

(for sensors with cable entry)

0,14 to 1 mm²
Weight min 200g

*) By increasing the length of the rod by 60 mm above the thread, the sensors can be used up to 200 ° C

MAXIMUM SPEED OF MEASURED MEANS FLOW - AIR AND STEAM / WATER [ms-1]
Length of the stem up to 60 mm > 100 to 160 mm
Values ​​for rod diameter 4 mm 8 / 0,8 3,2 / 0,4



These products can interest you