Wired thermocouple with intrinsically safe ATEX soldered connection

Features

• Single or double TC:
  Type J (Fe-CuNi),
  Type K (NiCr-NiAl),
  N-type (NiCrSi-NiSi),
  T-type (Cu-CuNi),
  E-type (NiCr-CuNi)
• Stainless steel AISI321 / 1.4541 or AISI316L / 1.4404, AISI316Ti / 1.4571 on request
• Threaded process connection
• Construction type: straight or angled
  
  
  

Temperature difference

The temperature range of the sensor depends on the insulation of the connection cable.

image	isolation	measuring range
	PVC / Sheath: PVC	-10 .. + 105 ° C
	Silicone / Sheath: silicone	-40 .. + 180 ° C
	Teflon® FEP / Sheath: silicone	-40 .. + 180 ° C
	Teflon® FEP / Sheath: silicone / Braid: copper	-40 .. + 180 ° C
	Teflon® PFA / Sheath: teflon® PFA	-40 .. + 260 ° C
	Teflon® FEP / Sheath: teflon® FEP / Braid: copper	-40 .. + 205 ° C
	Fiberglass / Sheath: fiberglass / Braid: stainless steel	-40 .. + 400 ° C

Description

The thermocouples of this series are designed to be screwed directly into the process, mainly into vessels and pipelines. These thermocouples are suitable for liquid and gaseous media under moderate mechanical load and under normal chemical conditions.

Constr.

The sensor consists of a thermocouple cable, a protective tube with threaded process connection and a cable.

Insertion length, process connection, construction type, thermocouple type, accuracy, cable insulation can be individually selected for the respective application.

Autres versions

This datasheet contains only a small portion of our wired thermocouple supply program. On customer request, other versions can also be delivered.