Connection head thermocouple with reduction - ATEX explosion-proof *Step required

GXD-TTSWR / GXD-APTTSWR
In production :  1 to 3 weeks

  • Design temperature range: -40 .. + 800 ° C
  • Technological process installations in all industries
  • Installation in hazardous areas:
    Gases, vapors, mists (G): Zone 0, 1, 2
    Dust (D): Zone 20, 21, 22
    Mines: M2 
Your configuration:

International shipping

FREE shipping in Europe from 100 € of purchase

Secure Payments

All payments are secure and approved.

Best price guarantee

Contact us to define your payment term.

+33-233-611-670

English - French - German - Spanish

Features

  • Single and double TC
  • Interchangeable mineral insulated measuring insert
  • Machined solid glove well (drilled) suitable for high pressures
  • Thermowell diameters: Ø18h7, Ø24h7
  • Thermowell material: 1.7335 steel or other
  • ATEX cable gland I M2, II GD, IP65 (cable diameter Ø5..10mm)
  • Output signal: TC or 4..20 mA (option)


Assembly instructions

Signed sensors ex.jpg II 1 / 2G IIC T6 ÷ T5 Ga / Gb  et ex.jpg II 1 / 2D Ex ta / tb IIIC TX Da / Db  have been designed for temperature measurement in all gas, liquid, mist and dust explosion zones. In zone 0 or 20 can only be a protection tube. The connection head can only be in zones 1 (21) or 2 (22). The boundary between the zones is the threaded connection.

Signed sensors ex.jpg II 2G IIC Tx Gb  et ex.jpg II 2D Ex tb IIIC TX Db  have been designed for temperature measurement in zones 1 (21) and 2 (22).

Description

The sensor consists of an interchangeable measuring insert, a drilled thermowell, a neck and an aluminum connection head where the mounting of a temperature transmitter with a 4-20 mA output signal / HART® or Profibus®PA is possible.

The measuring insert is the replaceable part of the complete sensor which reduces the time and cost of maintaining the measuring device installed in the object. The spring-loaded attachment of the measuring insert provides perfect pressure at the bottom of the protection tube, reduces reaction time to temperature changes and increases measurement accuracy and reduces natural vibrations, thus avoiding mechanical and electrical faults .

The length and design of the thermowell, the connection head as well as the type and number of sensors and the accuracy can be individually selected for the respective application.

Temperature transmitter (option)

The transmitter is mounted inside the sensor connection head, directly on the measuring insert.



Type GW1 aluminum, M20x1,5 cable gland
Type GW2 aluminum, 2 x cable gland M20x1,5
Type GW3 aluminum, M20x1,5 cable gland, with window for local LED display (LPI-02)
Type GW4 aluminum, 2 x cable gland M20x1,5, with window for local LED display (LPI-02)
Type S1 stainless steel, M20x1,5 cable gland
Type S2 stainless steel, 2 x cable gland M20x1,5

Information

Type of entries
Dual thermocouple inputs
Thermocouple
Maximum operating temperature
800°C
Diameter
18h7
24h7
Thermocouple type
E
J
K
N
T
Certification
ATEX EXD
Related products (8 other products in the same category)

Create account