ACCESSORIES
- Heat conductive paste up to 200 ° C, 5 g
- connectors
DECLARATION, CERTIFICATION, CALIBRATION
- The manufacturer issues the EU declaration of conformity.
- Calibration - All production goes through the output of metrological control, which is carried out by comparing with standards or working gauges. The connection of standards and working templates is ensured within the meaning of article 5 of Law No. 505/1990 on metrology. We offer the possibility of providing calibrated sensors (in accordance with the requirements of ČSN EN ISO / IEC 17025, as modified).
Sensor | G03.09 | |
Maximum operating temperature range | -50 to 200 ° C (may be limited by the type of sensor specified in the user manual) | |
Sensor type | Pt, Ni, NTC | |
Degree of protection | IP 67 according to EN 60529 | |
Housing material | brass | |
Case diameter | 6 mm | |
Case length | 35 mm | |
Contact plate dimensions | 20x32xR12 | |
Input cable | unshielded silicone 2 x 0,34 mm 2 | |
Resistance line | 0.161 Ω per 1 m for 2-wire connection | |
Response time | t 0.5 <15 s (on a smooth surface without paste) | |
Recommendations | use heat-conducting paste during installation |