PRECAUTIONS FOR USE
Right angle temperature sensors are designed to operate in a chemically non-aggressive environment.
It is recommended to use a temperature sensor to protect the sensor from the influence of the ambient temperature and thus reduce the error method due to the impact of the differences between the measured ambient temperature and the measured temperature.
Rectangular temperature sensors are designed to operate in a chemically non-aggressive environment.
DECLARATION, CERTIFICATION, CALIBRATION
- The manufacturer provides une EU declaration of conformity.
- Calibration - The final metrological control - comparison with standards or working instruments - is carried out for all products. The continuity of working standards and measuring instruments is ensured within the meaning of Article 5 of Law No. 505/1990 on metrology. We offer the possibility to supply the calibrated sensors (according to the requirements of EN ISO / IEC 17025) or in an accredited laboratory.
|Sensitive element||all types (Pt 100, Pt 1000, Ni 1000, Ni 10000, Ni 2226 = T1, NTC, PTC, KTY, TSiC, DALLAS, thermocouple K, thermocouple J, thermocouple T and so on)|
|Housing length L - measuring part||10 to 20 mm|
|Case diameter - measuring part||4 mm|
|Dimension box||according to the dimensional draft|
|Housing||DIN 1.4301 stainless steel|
|Wire / OK||M8 X 1 / OK 12|
|Input cable variations / temperature range
(may be limited by the type of sensitive element
- to be determined in the documentation)
|Shielded PVC -30 to 80 ° C
Unshielded PVC -40 to 105 ° C
shielded with silicone -50 to 200 ° C
Teflon shielded -50 to 250 ° C
with fiberglass 0 to 400 ° C (with metallic braid)
IP 50 to IP 67 depending on the type of cable
||> 200 MΩ at 500 VDC, 25 ± 3 ° C|
|Maximum permissible static traction on the input cable||1 kg|