Europe: +33 2 33 61 16 70 | America: +1 438 800 6104

Contact temperature probe with plastic connection head

Reference G03.14

Delivery in 3 to 5 weeks
  • Resistive temperature sensors.
  • Measures contact surface temperature. 
  • Supplied with a fastening strap and a cap.
  • Sensor design isolated from the environment.
468.33KB Download

Datasheet G03.14 | Contact temperature probe with plastic connection head

Product features Contact temperature probe with plastic connection head

ACCESSORIESContact probe with plastic connection headSurface temperature probe with plastic connection head

  • CONEC connector 43-00092
  • connection cables with direct rectangular RKT or RKWT connector
  • Thermally conductive paste up to 200 ° C, 5 g

Description and application

These resistive temperature sensors are designed for measuring the contact surface temperature. The sensors are supplied with a fastening strap and a cap and are suitable for temperature measurement in pipes.

The plastic head is supplied with a cable gland (the terminal box is located in the head) or a connector. The standard temperature range of the sensors is between -50 and 130 ° C.

The sensor design is isolated from the environment. The sensors can be used for all compatible control systems with sensor types or output signals listed in the technical parameters table. Easy installation of the temperature sensors is ensured thanks to the unique design.

DECLARATION, CERTIFICATION, CALIBRATION

  • The manufacturer issues the EU declaration of conformity.
  • Calibration - All production goes through the output of metrological control, which is carried out by comparing with standards or working gauges. The connection of standards and working jigs is ensured within the meaning of Article 5 of Law No. 505/1990 on metrology. We offer the possibility of supplying calibrated sensors (according to the requirements of the standard CSN EN ISO / IEC 17025).
Sensor type Nor 1000/5000 Nor 1000/6180 Ni 891 Nor 10000/5000 Nor 10000/6180
Measuring range -50 to 130 ° C (ambient temperature -30 to 100 ° C)
Max. DC current measurement 1 mA 1 mA 1 mA 0,3 mA 0,3 mA

Sensor type T1 = Ni 2226 Point 100/3850 Point 500/3850 Point 1000/3850 20 kΩ NTC thermistor
Measuring range -50 to 130 ° C (temperature near the head -30 to 100 ° C)
Max. DC current measurement 0,7 mA 3 mA 1,5 mA 1 mA 1 mW *)

*) maximum input power

Sensor type Point 1000/3850 Point 1000/3850
Output signal 4 to 20 mA 0 to 10 V
Standard measuring ranges **) -50 to 50 ° C 
-30 to 60 ° C 
0 to 35 ° C 
0 to 100 ° C 
0 to 150 ° C
-30 to 60 ° C 
0 to 35 ° C 
0 to 100 ° C 
0 to 150 ° C
temperature near the head -30 to 70 ° C
Supply voltage (Unap) 11 to 30 V DC 15 to 30 V DC recommended value of 24 V DC
Resistance to load Rz 150 Ω for Unap = 12 V 
700 Ω for Unap = 24 V
> 10 kΩ
Output signal when the sensor is broken > 24 mA > 10,5 V
Output signal for sensor short circuit <3,5 mA ~0V

**) At the customer's request it is possible to provide a customized measuring range of -40 to 150 ° C with a minimum range of 30 ° C (e.g. -20 to 15 ° C, -30 to 80 ° C, etc.). )

OTHER PARAMETERS
Sensor accuracy class  Ni sensors: cl. B, Δt = ± (0,4 + 0,007 t), for t ≥ 0; Δt = ± (0,4 + 0,028 | t |), for t ≤ 0 in ° C; 
Pt sensors: cl. B according to EN 60751, Δt = ± (0,3 + 0,005 | t |) in ° C 
NTC 20 kΩ: ± 1 ° C for the range from 0 to 70 ° C
Measurement error NS 540 (K), NS 740 (K) *), **) <0,6% of range, at least 0,5 ° C
Sensor connection according to the wiring diagram
Response time t 0.5 <13 s (on a smooth surface without paste)
Recommended conductor cross section - sensors with bushing From 0,35 to 1,5 mm 2
Type of connector in the head - sensors with connector RSFM4 - Lumberg
Insulation resistance > 200 MΩ at 500 V DC, 25 ° ± 3 ° C; humidity <85%
Degree of protection IP 65 according to EN 60529
Housing material brass
Head material POLYAMIDE
Protective material POLYAMIDE
Standard band length 40 cm
Minimum pipe diameter 20 mm
Working conditions ambient temperature: -50 to 100 ° C; -30 to 70 ° C with 
Relative humidity of transmitter: 100% max. (Ambient temperature 25 ° C) 
atmospheric pressure: from 70 to 107 kPa
The weight about 0,15 kg

*) The error of the temperature sensor depends on the influence of the ambient temperature and the environment and on the properties of the measured surface (method error). 
**) It is recommended to apply conductive paste or silicone grease to the surface to ensure faster response and minimize method error when measuring temperature with a sensor.

These products can interest you