Europe: +33 2 33 61 16 70 | America: +1 438 800 6104

Probe with fast response time display

Delivery in 3 to 5 weeks
  • Resistance temperature sensor.
  • Quick response with display.
  • Measurement by contact of liquid or gaseous substances. 
  • Can be used for all compatible systems.
323.54KB Download

GNSD560R Datasheet | Probe with fast response time display

Product features Probe with fast response time display

Screenshot 2022-04-12 134059-depositphotos-bgremover.png

DESCRIPTION AND APPLICATION

These fast reacting resistance temperature sensors with display are designed for measure the contact temperature of liquid or gaseous substances. The structure of the sensor rod allows the sensor to be used for direct temperature measurement in ducts and also guarantees a quick response from sensor to temperature changes.

The temperature sensing element is located in a metal rod with a length of 50-220 mm. The plastic sensor head temperature with screen is equipped with a cable grommet or a connector; the measured temperature is indicated on the 4-digit display located under the transparent cap of the head.

Temperature sensors with display can be used for all compatible control systems with the output signals listed in the technical parameter table.

The maximum temperature range for adjusting the current loop of temperature sensors with display is between -50 and 150°C. Within this range, the required operating temperature ranges can be programmed, while the minimum difference between the lower and upper limits of the temperature range is 10 ° C.

The measurement temperature range with the temperature sensor with display is between -50 and 110°C and, simultaneously, the maximum temperature around the head is between -30 and 70°C and should not be exceeded, even for a short time. 

Temperature sensors with shield comply with ingress protection IP 65 according to EN 60529. The temperature sensors with display are easy to install thanks to the unique design of the "S-head".

The sensors are designed to operate in a chemically non-aggressive environment, the use should be selected according to the temperature resistance of the metal head and cases.

ACCESSORIES

  • For the version with connector: connector with LED CONEC 43-00092
  • Connection cable with connector RKT from straight type or with connector RKWT of type rectangular

DECLARATION, CERTIFICATION, CALIBRATION

  • The manufacturer provides an EU declaration of conformity.
  • Calibration - The final metrological control - comparison with standards or working instruments - is carried out for all products. The continuity of working standards and measuring instruments is ensured within the meaning of Article 5 of Law No. 505/1990 on metrology. We offer the possibility to supply the calibrated sensors (according to the requirements of EN ISO / IEC 17025) or in an accredited laboratory.

Sensor type 
(K - with a connector)
NSD 560 
NSD 560K
NSD 760 
NSD 760K
Output signal
4 to 20 mA 0 to 10 V
Sensitive element type Pt 1000 / 3850, accuracy class B (± 0,3 + 0,005 x | t |) in ° C
Measuring range
Adjustable
Maximum temperature range - 50 to 150 ° C
Rental error
0,8% of the range, at least 0,5 ° C
Display screen 4 digits, LED, character size 7,62 × 4,22 mm
U supply voltage 15 to 30 V DC
Rated voltage Un 24 v
Resistance to load Rz
Rz max 250 Ω Rz min 10 kΩ
Current / voltage when the sensor is interrupted > 24 mA > 12 V
Current / voltage when the sensor is 
shorted
<3 mA ~0V
Material of the head
POLYAMIDE
Size of the head 70 x 63 x 34 mm
Wire section 0,35 to 1,5 mm2
Protection sign 
IP 65 according to EN 60529
Connection cable through the M 16 × 1,5 cable gland / through the LUMBERG M12 connector
Ambient temperature around the head -30 to 70 ° C
Electric force 500 V / 50 Hz according to EN 60730-1

Other parameters
Length of the stem 
50, 100, 160 and 220 mm
Diameter of the stem
+0,1 mm
Material of the stem
DIN 1.4301 stainless steel
Insulation resistance > 200 MOhm at 500 V DC, 25 ° C ± 3 ° C, relative humidity <85%
Maximum measuring range -50 to 110 ° C

These products can interest you